Domestic elevator brand's Freight elevators are mainly used to lift flammable and explosive chemicals from one height to another. Due to the special nature of the materials transported by this equipment, extra care must be taken during operation. Correct operation and use can effectively reduce freight elevator malfunctions and wear. There are many key points to using a freight elevator. Today, we will briefly introduce the precautions before operating the equipment.

Domestic elevator brands remind everyone, Before operating the equipment, carefully inspect the freight elevator components. Check for leaks in the hydraulic piping components, loose or damaged wiring contacts, and secure screw connections. After inspection, the four legs of the equipment should be placed firmly on solid ground. The work surface must be level. The power indicator light should be on, and then start the motor and oil pump. 。 Domestic elevator brands remind everyone, Conduct a test run before formal operation; that is, raise and lower the elevator without a load once or twice. Ensure all parts function normally. If the temperature is below 10°C during use, let the pump run for 3 to 5 minutes and ensure it is operating normally before proceeding.

Domestic elevator brands remind everyone, After the operator enters the lifting platform, the safety rope on the guardrail door must be closed and the locking pin inserted. The operator's position should be as close to the center of the work surface as possible. Overloading is strictly prohibited during freight elevator use. For safety reasons, operators on the platform must not move during the lifting process.

Domestic elevator brands remind everyone, Prohibiting the use of the equipment when malfunctioning is an important requirement. If the freight elevator malfunctions, immediately cut off the power and perform repairs. Non-professionals should not disassemble hydraulic or electrical components.

Domestic elevator brand's During the installation of rail freight elevators, verticality problems with the rail frame are likely to occur, affecting the safe use of the elevator. Therefore, if such problems occur during installation, they need to be addressed immediately. This problem can occur not only during installation but also during subsequent use, mainly due to installation problems. The primary causes of vertical deviation in the guide frame are poor control of the height difference in the base frame and improper installation methods for wall supports. Common problems in guide rail installation include excessive verticality and excessive angles between the wall column and the attachment surface. Generally, the installation verticality of the guide frame should be controlled to around one-thousandth, but in actual installation, more than half of the rail freight elevators will have a void image.

Domestic elevator brands remind everyone, If the freight elevator is used when the rail frame verticality is poor, the car guide rails and rail supports may not match, resulting in increased noise, severe wear on the outer walls of the rail supports, and frame deformation over time. This not only brings inconvenience to future installation and use but also significantly reduces the service life of the freight elevator.

That's all for today's explanation. If you need freight elevator construction, please contact us. Domestic elevator brands 。